ACCESSORIES
Romanian AK Rifle Part Sets
Romanian AK-47 Spare Parts Kit. 7.62x39mm.
Used, good condition. Numbered parts generally
do not match.
Kit comes with all depicted parts. Lower forend furniture may vary.
Parts kit are De-Milled To BATFE Specs.
Kit does NOT include receiver or barrels.
Brand New U.S. Made Barrels Available
Intended for purposes of collection, repair, or replacement parts
only
Brand New U.S. Manufactured AK Barrel
New, US Manufactured Chrome Molly 7.62x39mm
16'' barrel.
Rifling: 1 in 10 twist 6 groove. Barrel has gas port hole drilled.
These barrels are designed to work with most European-block AKs.
*Not for use with milled receivers*
Romanian AK Parts Set ...Item # ROM-AK-PS.....$189.99
U.S. Mfg AK BBL...Item # US-AK-BBL................$69.99
Romanian Parts Set with Barrel...Item # ROM-PS-BBL..$249.99
AK
Ready To Build Receiver
Really nice stamped CASAR AK-47 Rifle Receiver
complete with guide rails and ejector. These are absolutely ready
to build.
Manufactured by I.O. Inc. 7.62x39 caliber......
Item # AK-REC.................$49.99
We just came across this super new deal on
PSL Mags
and I decided to put it right here on top
New PSL - FPK - ROMAK-3
- 7.62x54r Mags
If You've got the Rifle
You Need More Mags
What a great find.
Everyone loves the PSL or FPK Rifles.
Some people even know them or their different variations as ROMAK-3's.
But whatever you call them, these hard hitting , highly accurate rifles
have only ever had one draw back. The extra mags were expensive and
somewhat hard to find.
Well, that it until now. Classic Arms just uncovered a small lot of
new military unissued mags along with their troop carry pouches. These
mags had been stored in hermetically sealed containers deep within
the bowels of Mother Russia and are only now seeing the light of day.
Or something like that. All B/S aside these are new 10 round mags
and we feel really blessed to have been able to procure them. Not
only that, but the price is right. Unfortunately we were only able
to get a small quantity and when they are gone, they are gone...
Stock up now.
Item # PSL-MAG............$29.99 each
OR
Buy 4 at $25.00 each and we will throw in the Pouch for Free
--------------------------------------------------------
Saiga Accessories
Saiga Rifle Mags
All of our Saiga mags and drums are manufactured by S.G.M.
Tactical and are engineered through CAD (Computer Aided Design) systems.They
are manufactured to SAE standards in an ISO 9001:2000 approved manufacturing
facility right here in the USA. Their injection molds are cut from P20
pre-hardened tooling steel and our retractable cores are cut from S-7
heat treated steel. This gives us absolute accuracy of all mag components
for years to come.
Longevity Gives Us Perpetual Performance.
The Dupont™ composite/glass-filled polymer
was specifically chosen to provide us with an extremely durable, internally
slick, fast feeding mag that will provide years of service. The springs
are slightly longer to provide a more uniform pressure and are specially
coated to provide smoother action along with resisting moisture.
All of our mag designs are tested for perfect
fit, smooth, fast, reliable feeding and durability. Continuous smooth
feeding is mandatory; therefore, we tested our mags with a variety
of ammo from various manufacturers. Knowledge Gained Was Knowledge
Used. Our Mags Feed Flawlessly! Ammunition used for testing included:
American Eagle – Bernaul – Brown Bear – Federal
– Fiocchi – Golden Tiger – Hornady – New Lake
City – Remington – Seller & Bellot – Speer –
Ultramax – UMC – V Max – Winchester – Wolf.
(All of the fore mentioned companies are either registered or trade
marked.)
Each mag is sealed in a 4 mil plastic sleeve
with mag warranty information enclosed.
S.G.M. offers complete Tech Support as well as a five year free factory
replacement policy.
Note *All S.G.M. mags are U.S. made and will
act as 3 compliance parts. Sale and possession of the high cap mags
and or drums are legal where allowed by state law butindividual should
be responsible for insuring that their own rifle or shotgun in compliant
with Sec 922r, before installing high cap mags into the firearm.
Saiga.308 Caliber 24 rd
Polymer Mag by Pro Mag
Item # PM24-308.....$29.99 |
Saiga.308 Caliber 25 rd Polymer Mag by SGM
Item # SSGMP30825.....$39.99 |
Saiga 7.62x39 30 rd Polymer Mag
By SGM
Item # SSGMP76230....$29.99 |
Saiga .223 30 rd Polymer Mag
By SGM
Item # SSGMP22330....$29.99 |
Saiga Shotgun Mags
All of the same info we have posted above pertaining
to our Saiga rifle mags also pertains to our Saiga Shotgun Mags.
All are in stock now... Sec 922r may apply to the installation of
high cap mags.
Customer assumes responsibility for compliance.
Saiga .410 gauge Polymer Mag
15 round capacity
Item # SSGMP41015................$47.99 |
Saiga .12 gauge Polymer Mag - 4 different
capacity options available.
2 Rd - Item # SSGMP1202....$29.99 /
8Rd Item# SSGMP1208...$39.99
10 Rd - Item # SSGMP1210...$33.99
/ 12Rd Item# SSGMP1212...$44.99
|
Saiga .223 100 Rd. Dual Drum Mag
 |
These
are virtually indentical to the popular Beta type AR-15 style
Dual Drum Mags but manufactured to work with the ever popular
.223 caliber Saiga Rifles. We were terribly impressed with the
remarkable feat of engineering that the manufacturer put into
these to adapt them to the Saiga Rifle. We were even more impressed
with the way that they worked... They functioned flawlessly.
Manufactured for use in 922r compliant firearms only.
Sales and possession ande perfectly legal. Buyer assumes all
liability for use and installation in compliance with state
and federal law.
Item # SGMT223D100...............$164.99
|
Saiga Muzzle Breaks by S.G.M.
Our S.G.M. Muzzle Breaks are all designed to simply
screw on to the existing threads of your favorite Saiga Shotgun.
All steel construction, not only do these look great but they work
great in evenly dispersing the gas blast, and keeping the barrel rise
to a minimum while reducing felt recoil.
The Pro Muzzle Break
for .410 gauge Saiga
Item #SGMT410P......$42.00 |
The Pro Muzzle Break
for .12 gauge Saiga
Item #SGMT12P......$42.00 |
The Saber Boss Muzzle Break
for .410 gauge Saiga
Item #SGMT410SB......$45.00 |
The Saber Boss Muzzle Break
for .12 gauge Saiga
Item #SGMT12SB......$45.00 |
Saiga Shotgun Choke Sets
Saiga .410 Shotgun Chokes. This is a
tri-pack consisting
of 3 different choke tubes. Designed to screw onto external
threads on barrel. You will get chokes in Extra Full,
Full and Modified. All are Black Oxide, 4150 Steel, 40 Rockwell,
Chrome Lined, W / Gold Lettering
Item # SGMT410TP.................$92.00
|
Saiga .12ga Shotgun Chokes. This is a
tri-pack consisting
of 3 different choke tubes. Designed to screw onto external
threads on barrel. You will get chokes in Extra Full,
Full and Modified. All are Black Oxide, 4150 Steel, 40 Rockwell,
Chrome Lined, W / Gold Lettering
Item # SGMT12TP.................$92.00
|
S.G.M. Tactical Stock Set
|
|
Designed especially for Saiga's and AK-47's. It has the balance
and hefty look that the AK needs and works great on the Saiga.
Infinite adjustibility on its picatinny based slide system.
Goes from 9-1/2" length of pull to 14-1/2" length
of pull. Its recoil pad reduces felt recoil by 50%.
Made in the U.S.A. so counts as a compliance part.
It's tucked away up front trigger system is
easy to reach and won't hang up on clothing, vests, slings etc.
Manufactured of glass filled Zytel for superior strength. A
rubber pad covers the three cavitities for storage of batteries,
cleaning brush and cleaning kit. (Not supplied) Ambidextrous
Cheek Rest is also available. Back locking plate with sling
shots, castle nut, and wrench are included.
Top Sling Mount built in. Lower Picatinny
Rail for sniper mono pod, flashlight, and sling mount etc.
Item # SGMTTSK............$119.99
|
Saiga Recoil Pad
|
|
Manufactured exclusively to fit the Original Saiga stocks
on both the rifles and shotguns.
These are nice.
Reduces felt recoil by 45%. Made in the U.S.A.... Your shoulder
will thank you.
Item # SGMTRP .......................$19.99
|
More Great
Saiga Accessories
BACK IN STOCK NOW
PRO MAG 10 ROUND MAG FOR SAIGA 12 GA.
THESE ARE THE HIGHLY POPULAR 10 ROUND MAGS FOR THE
SAIGA SHOTGUN. THEY ARE NOT ORIGINAL BUT ARE MADE HERE IN THE U.S.
BY PRO MAG. SALE AND POSSESSION OF THESE MAGS IS PERFECTLY LEGAL BUT
STATE AND FEDERAL REGULATIONS ON THE LEGAL USE OF THESE MAGS IN A
SAIGA SHOTGUN MAY VARY .
PURCHASER ASSUMES ALL RESPONSIBILITY FOR ABIDING BY THE LAW.
ITEM # ..SAIGA12-10MAG............................$29.99
ORDER
ON-LINE NOW!
WHAT ABOUT THIS
SAIGA 12 GA 20 ROUND DRUMS
By MD Arms
- 
Saiga 20 Round Drum Mags proudly manufactured in the good ol U.S.A.
These are super nice and perform flawlessly.
They are all the rage on You Tube.
Nothing say's firepower like a 20 round 12 gauge drum.
Your choice of clear front , or smoke front ( viewable )
or solid black finish.
Clear -----Item # Saiga-20C-D.........$99.99
Smoke---Item # Saiga-20S-D........... $99.99
Black-----Item # Saiga-20B-D...........$99.99
ORDER
ON-LINE NOW!
Pro-Mag Brand Saiga 12 Gauge 12 Round Drum
This is a new item for us but one that I personally
like. We have carried the M.D. Arms 20 Round Drum for the Saiga 12
gauge for some time now and honestly we have been very pleased with
them. They function great and we never have any complaints, well,
except for one. Some people have stated that they would like a smaller
profile drum even if it meant giving up capacity. Well, we saw this
at the shot show and thought it fit the bill nicely.
It's hard to tell from the photo but this 12 round drum from Pro-Mag
displaces only about 60% of the space of the 20 round drum. It is
more ergogenic and fits more closely within the lines of the firearm
making it a little easier to carry and handle.
If you are a big ol hoss of a guy and like the capacity of the 20
rounder stick with that.
If you want something a little smaller give this great little drum
a try.
Item # PM-SAIGA-12D.................$79.99
LOOK AT THESE GREAT
SAIGA ADDITIONS
SAIGA / AK
ERGONOMIC GRIP
This grip is based off the factory Molot style
grip used on the Molot Vepr 12 shotgun. It is basically the
same as the factory Izhmash grip but with added finger grooves.
We are offering a lifetime warranty on this grip. Our grip drastically
out performed the factory Izhmash grip during torture testing.
This grip is made in the USA using American made materials.
Even the injection molds are made in the USA, in house, by MD
Arms, Ltd.! We could have had the molds made over seas (sadly
like a lot of companies have to do these days to stay competitive)
for a fraction of the cost, but to hell with that! We are keeping
our money and jobs right here and at the same time making higher
quality molds and molded parts!
Our grip will fit AK-47, AK-74, and RPK variants, Russian Izhmash
Saiga shotguns and rifles that are pistol grip converted, and
the PK (PKM) machine guns.
ITEM # MOLOT GRIP....... $12.00
ORDER
ON-LINE NOW! |
STAINLESS SAIGA
PISTON
This piston is intended as a US made replacement
for the 12, 20, and .410
gauge factory Saiga piston. It counts as a 922 compliance part.
High precision machined from pre-hardened stainless steel. It
features a concave ring in the face to reduce gas loss around
the piston during pressurization which makes it slightly more
efficient than the factory part. The increase in efficiency
should not be considered as a increase in reliability. If that
is what your looking for please take a look at our Saiga Booster
Piston by clicking here. The Stainless piston is stamped both
with "MD Arms" and a "S" under it and counts
as one US made 922 compliance part.
ITEM # SS-PISTON........$9.99
ORDER
ON-LINE NOW! |
SAIGA BOOSTER PISTON
The MD Arms Saiga Booster Piston is the first
of it's kind. It is the only Saiga piston available that will
greatly increase the cycling power of your 12, 20 or .410 gauge
Saiga shotgun when using cheap low power ammo. It is a great
piston for use during the break-in period of your gun as well
. Good for competition shooters that want to ensure a stronger
ejection from low power ammo as well. The piston is coated in
a very high temperature diamondized coating for wear and corrosion
resistance. It also features a concave ring in the face to reduce
gas loss around the piston during pressurization. The Booster
piston is stamped "MD Arms" and counts as one US made
922 compliance part.
PLEASE NOTE: If your Saiga doesn't have problems
ejecting low power ammo fired from the hip out of a fully loaded
MD-20 20rd drum this isn't the piston for
you and our Stainless Saiga Piston will better meet your needs.
The Booster piston is not recommended for use with high power
ammo unless you have replaced the factory gas plug with the
MD Arms V-Plug. Using high brass ammo in combination with the
Booster Piston and the factory gas plug will over work the system.
Also please note that although the increase in cycling power
is significant it is still not enough to account for a missing
gas port in your Saiga.
ITEM # SB-PISTON.......$15.99
ORDER
ON-LINE NOW!
|
DRESS YOUR SAIGA
12 UP WITH A COOL MUZZLE BREAK.
- 
Saiga 12 Guage Flash Hiders / Muzzle Breaks
The first photo above is AR-15 birdcage style and the second is the
original Izhmash style.
Both are Made in the U.S.A. and do count as a 922 compliance parts.
This comp is
manufactured from high quality material with great attention to detail.
No gunsmithing required. Controls barrel rise during rapid firing.
They look great on the weapon too.
These are fantastic.
AR-15 BIRDCAGE STYLE....ITEM # SAIGA-BCFH....$34.99
IZHMASH STYLE............ITEM # SAIGA-ISFH...........$34.99
ORDER
ON-LINE NOW!
MORE GREAT SAIGA ACCESSORIES
MD ARMS GAS ADJUSTMENT SAIGA V-PLUGS
If you only make one change or addition to your Saiga-12, the MD Arms
V-Plug should be it!!! Anyone that owns a Saiga-12, from a full length
IZ-107 down to a 8" Short Barrel Shotgun, will benefit from the
MD Arms V-plug no matter what ammo you use.
The V-Plug plug has many improvements
over the factory plug and other aftermarket plugs. Installs in minutes
simply by unscrewing the factory plug and screwing the V-Plug back
in.
The V-Plug has 5 settings compared
to the factory's 2!
Why do you need to replace
the factory gas plug with the MD Arms V-Plug? To prevent damage and
accelerated wear to your gun and it's parts. Because even at best,
the factory plug with it's limited two settings, leaves your Saiga-12
over gassed with some makes of ammo. Also, depending on your specific
gun, the factory plug may allow low brass to function on the high
brass setting. If so, that means you basically have a one setting
Saiga-12, that is majorly over gassed with everything but low brass...
This is mostly to blame on the random start of the threading on the
factory plug and in the gas block (please view comparison pics below).
Another source of the blame is that the factory plug only has 2 settings.
For example, the PKM and RPD have 3 gas settings and fire rifle ammunition
that has A LOT less variation in powder charge and projectile weight
from one type to the next when compared to the vast array of 12ga
ammunition types in 2 3/4", not even considering the array of
3" types. The 2 setting factory Saiga-12 plug isn't even close
to sufficient for the variations of 12ga ammo.
When on the low brass setting the MD Arms V-Plug plug better utilizes
the gas from the low power ammo,
slightly increasing the cycling power of the gun.
And the biggest benefit of
the V-Plug is it has 4 different medium to high brass settings. Unlike
the factory plug, the V-Plug allows you to adjust the gas system to
prevent the high power ammunition types from over gassing your system.
The MD Arms V-plug is second to none when considering both factory
and aftermarket plugs, in regards to regulating the gas flow in your
Saiga-12, PERIOD!
Other improvements of the MD
Arms V-Plug...
We could start threading in
the same place on every V-Plug but because the factory threads in
the gas block are random it is impossible to make the plug stop at
the same point in every gun. With the factory and other aftermarket
plugs you can lose settings because the plug has to be backed out
to far to reach it's settings. With other aftermarket plugs your setting
spectrum can be split in half not allowing them to be used in a graduating
scale, making your setting spectrum confusing. The MD Arms V-Plug
has 2 complete sets of it's 5 settings spectrum opposite of each other.
This ensures the V-plugs settings can be used in a graduating scale
in every gun and also prevents the loss of settings from having to
back it out to far. The MD Arms V-Plug is the ONLY plug to offer this
consistency!
The V-Plug has a shallow pocket
in it's face. This allows for much more plastic fouling to accumulate
without it interfering with the piston or ports, unlike the factory
or other after market plugs. This pocket also helps plastic fouling
better burn up increasing it's surface area to the hot gasses. And
reduces plastic fouling in the threads by better directing it away
from them.
It is finger adjustable, unlike
the factory plug which requires the locking pin to be depressed with
a tool to change settings. You can turn the V-Plug by hand without
manually depressing the locking pin. And if it does become to hot
or to tight from dirty threads to adjust by hand it has over-sized
tool slots that will easily except a variety of different pry tools.
The V-Plug also has a band in front of the threading that is slightly
thicker to better seal off fouling from the threads.
The V-Plug
is hands down the best Saiga-12 plug available! ITEM # V-PLUG.......$24.99
ORDER
ON-LINE NOW!
Classic Firearms is proud to introduce some new
accessories from Allen.
Allen Accessories is one of the oldest and most trusted names in the
Shooting Sports Industry and their products are proudly made in the
U.S.A.
Allen Bore Light W / Batteries
I have used bore lights for over 25 years and
in my humble opinion these are the best type to have.
Flexible neck with a pocket clip as well as a key ring. Long battery
life.. Don't go to the Gun Show without it.....
Item # ALLEN-BL-15860...............$7.99
ORDER
ON-LINE NOW!
Allen Molded Ear Plugs
Super comfortable and supple polymer material
form fits to your individual ear.
Comes in keychain style carrier for protection and storage. Never be
without protection... for your ears.
Item # ALLEN-EP-2294......................$4.99
ORDER
ON-LINE NOW!
Allen Shooting Glasses
Worlds most popular shooters glasses.
Padded nose bridge & temples, ANSI rated, 1.0mm polycarbonate yellow
lenses
Item # ALLEN-SG-22751............$7.99
ORDER
ON-LINE NOW!
Allen Brand - Denali Neoprene Cartridge Sling
W/Swivels
What a great sling. Sling incorporates 5 cartridge
loops that will accept rounds from .223 Winchester to 300 win Mag.
We have also found that these loops will also accept .410 and .20 gauge
shells and they look and work great with our Saiga shotguns. An excellent
and very functional complimentary item to your hunting rifle... Slip
proof shark skin back with the cushioning effects of neoprene. includes
swivels on each end..... One of the best slings we have found...
Item # ALLEN-SL-8888..................................$19.99
ORDER
ON-LINE NOW!
Allen Calmshell Type 12 Gauge
Cleaning Kit
Compact Flexible Rod Cleaning Kit for 12 gauge
Shotguns. Easily transportable....Includes all you see above...
Item # ALLEN-CK-70559......................$12.99
ORDER
ON-LINE NOW!
Allen 60 piece Deluxe Cleaning Kit in Aluminum
Carry Case
Cleans everything from .17 caliber up to .54
caliber and all shotguns... Best of all this comes in an aluminum brief
case style case to keep all of your components organized. These are
extremely nice and if you own firearms you need one.
Price is right too...
Item # ALLEN-CK-70565...........................$34.99
ORDER
ON-LINE NOW!
Allen Deluxe Shooters Staff / Monopod
These are very nice. Made of high strength light
weight polymer and aluminum alloy with a padded grip and wrist strap.
Collapses to 21.5 inches for carry or expands to 60 inches for a full
on stand up rest. Expands and locks to any increment in between. A perfect
kneeling rest or any size shooter. Makes a great walking stick too.
Gun rest on top unscrews to reveal a universal spoting scope or camera
mount. Never be in the field without a rest again.
Item # ALLEN-DSS-2163.........................$12.99
ORDER
ON-LINE NOW!
ALRIGHT AR-15 FANS
HERE'S WHAT YOU'VE BEEN WAITING FOR !!!!!
Slide Fire SSAR-15 Bump Fire Stock
100% legal to own and use! Slide Fire Solutions' ground
breaking "Slide Fire Stock" technology and ergonomic design
provide individuals the ability to Bump Fire more safely - offering
another element of entertainment for recreational shooters everywhere!
You can now safely and accurately bump-fire your AR-15 at an incredible
rate. Each SSAR-15 comes with a Hex Key to remove the factory pistol
grip, Interface Block, SSAR-15 Rifle Stock, BATFE Approval Letter, and
Installation / Operation Instructions. Every SSAR-15 stock has a Lifetime
Warranty from the manufacturer covering defects in materials and workmanship.
Applying principles that have been used for over 40
years to Bump Fire - this new radical design ensures the operator
can hold the rifle correctly without compromising their own safety
or the safety of others around them. Unlike when bump firing from
the hip; the SSAR-15 allows the shooter to properly aim the firearm.
In addition, the shooter must push forward to discharge each round,
as a result, the shooter corrects their point-of-aim for each shot
discharged instead of allowing recoil to push the muzzle upward.
SEE
THE SLIDE FIRE IN ACTION HERE
•Available in both Right and Left handed
models • Quickly installs on any AR-15 with an adjustable stock
•Constructed of premium reinforced high
strength polymer • Compatible with Mil-Spec and Commercial buffer
tubes
•Some aftermarket trigger guards and
sling attachment points may not be compatible
Installation Notes:
The SSAR-15 is designed for use on all AR-15 rifles equipped with
a carbine style buffer tube.
There are no permanent modifications or gunsmith required to install
the SSAR-15.
By removing the factory pistol grip and replacing
it with the provided Interface Block - the SSAR-15 simply slides onto
the buffer tube;
replacing the factory adjustable stock. All tools required to install
the SSAR-15 are provided.
Compatible with Mil-Spec and Commercial Buffer tubes.
PLEASE NOTE:
The SSAR-15 is NOT a mechanical device. It does not perform any automatic
functions, and it does not increase a rifles rate of fire.
The SSAR-15 is a rifle stock, and the muscular application
of force to create forward movement of the firearm defines the will
of the shooter to discharge each individual round of ammunition. Each
discharge requires a separate decision by the operator to move the
firearm back to a firing condition.
With the SSAR-15 installed – the firearm is
still dependent on an actively engaged operator at all times; if the
operator ceases to apply sufficient effort to move the firearm back
to a firing condition; the firearm will immediately cease operating.
The SSAR-15 is a non-mechanical device and will work as advertised
with
any rifle that meets the use specifications and is set up correctly,
therefore returns on this item are subject to a restocking fee and
our actual shipping cost.
ATTENTION - The installation and/or use of a Slide Fire Solutions,
Inc. product - is a binding agreement that the purchaser assumes all
risks associated with the use of said products, and releases and holds
harmless W.R.J. Holdings LLC,Classic Firearms, Classic Arms Inc.,
Slide Fire Solutions, Inc., and /or their affiliates, successors,
shareholders, employees and representatives, from and against any
liability, disability, death or loss or damage to person or property,
whether arising from negligence or otherwise.
Yes, These are expensive, but that is for a
good reason, They are high quality, and they work.
As a special item introduction we are offering
free shipping anywhere in the Lower 48 States
Item # SSAR-15-...$349.99 W/Free
Shipping
ORDER
ON-LINE NOW!
New Slide Fire Bump Fire Stock for AK-47 Rifles
Works on all standard straight stock AK Rifles
Finally , The Wait is Over !!!!!
The Slide Fire for the AR-15 has been one of
our most popular accessory items ever. So popular in fact that people
have been clamoring to apply the same technology to their AK's. These
have been in the R & D stage for quite some time now but the product
is now perfected and the long wait is over.
For those who love the SSAR-15 line of firearm accessories, or those
who long to hold onto an AK rifle
as it accurately pops off rounds really , really fast,
Get ready for the latest product from Slide Fire Solutions which was
created for the most talked about platform on the market, the AK-47
Rifle !!!!!
Classic Firearms is excited to announce the
SSAK-47 XRS.
This item is guarenteed to take the fun factor of firing your AK to
a fun to a whole new level!
This product is sure to be one of the hottest selling firearm accessories
of the year.
The SSAK-47 provides a safe, rapid fire experience
for your AK-47 type rifle and is based on the same technology that
has been enormously popular with Slide Fires Ar-15 platform over the
last couple of years. Swe offer for the SSAR-15 with your AK-47. The
SSAK-47 XRS is a complete system with every part designed to work
together for the best possible results. Compatible with any AK-47
equipped with a standard stock, the SSAK-47 XRS offers bolt and go
convenience without any additional modifications to the firearm.
Simple modification for an AK-47 rifle that
allows operator to shoot as quickly as desired. All tools required
for installation are provided.
No permanent modifications to your weapon are necessary. Available
in right and left hand models.
Includes: SSAK-47 XRS Rifle Stock, (Right
or Left Handed), Interface Block, Nut Retainer, Hex Key , Mounting
Hardware, and Instructions.
PLEASE NOTE:
The SSAK-47 XRS is NOT a mechanical device. It does not perform any
automatic functions, and it does not increase a rifles rate of fire.
The SSAK- 47 XRS is a rifle stock, and the muscular
application of force to create forward movement of the firearm defines
the will of the shooter to discharge each individual round of ammunition.
Each discharge requires a separate decision by the operator to move
the firearm back to a firing condition.
With the SSAK-47 xrs installed – the firearm
is still dependent on an actively engaged operator at all times; if
the operator ceases to apply sufficient effort to move the firearm
back to a firing condition; the firearm will immediately cease operating.
The SSAR-15 is a non-mechanical device and will work as advertised
with any rifle that meets the use specifications and is set up correctly,
therefore returns on this item are subject to a restocking fee and
our actual shipping cost.
ATTENTION - The installation and/or use of a Slide Fire Solutions,
Inc. product - is a binding agreement that the purchaser assumes all
risks associated with the use of said products, and releases and holds
harmless W.R.J. Holdings LLC,Classic Firearms, Classic Arms Inc.,
Slide Fire Solutions, Inc., and /or their affiliates, successors,
shareholders, employees and representatives, from and against any
liability, disability, death or loss or damage to person or property,
whether arising from negligence or otherwise.
Yes, These are expensive, but that is for a
good reason, They are high quality, and they work.
And unlike the AR, a buffer is not required so these are coming in
at a lower initial price point than the AR-15 variation.
We will begin shipping these just after the 1st of the year and expect
to be back ordered quickly... Get your order in now.
As a special item introduction we are offering
free shipping anywhere in the Lower 48 States
Introductory Price........Price subject to increase .....Hurry...
Item # SSAK-47-...$299.99 W/Free
Shipping
ORDER
ON-LINE NOW!
New Just In
AR-15 Complete Barreled Uppers
No FFL Required
This is a complete AR-15 Rifle upper assembly from
Del Ton Inc. Del-Ton is one of the leading manufacturers of police
tactical and military grade AR-15 parts and accessories in the U.
S. This Upper is complete and has been head spaced and test fired
for assurance of function and accuracy. Includes forward assist. These
are super nice.
Comes as you see above ready to drop in to any completed lower.
Componants include a pre-ban style ( with lug and birdcage
comp ) DTI 16" 1x9 twist chrome moly M4 barrel, flat weaver type
upper ( ready to accept all industry std carry handles, mounts, etc.
) bolt and carrier assembly
charging handle, forward sling swivel, and CAR handguards
Del-Ton products set the standard for quality and reliability in AR
Rifles and componants
In Stock Now ....Item # DT1009.......$379.99
Del Ton AR-15 M4 Rifle Kit
No FFL Required
Features The M4 complete barrel assembly as above,
plus all componant needed to build a complete rifle ( Less Stripped
Lower Receiver ). Kit includes 16" M4 Rifle Kit comes with
everything needed to complete a stripped lower receiver.
Includes fully assembled, headspaced and test fired upper receiver,
lower parts kit and M4 6 position collapsable buttstock.
Includes : Pistol Grip, Trigger, Hammer, Disconnector, Selector,
Bolt Catch Spring, Detent Spring, Bolt Catch Button, Take Down Detent
Bolt Catch, Magazine Catch Spring, Bolt Catch Roll Pin, Magazine Catch
Button, Magazine Catch, Front Pivot Pin, Hammer Spring
Trigger Spring, Pistol Grip Screw, Pistol Grip Lock Washer, Selector
Spring, Detent Selector, Hammer Pin, Trigger Pin, Take Down Pin
Buffer Retainer Pin, Buffer Retainer Spring, Disconnector Spring
Rifle kit does not include stripped lower receiver or magazines
Item # RKT100....................$449.99
Need Some Mags? - Of Course You Do
And these are The Best
Magpul Industries AR-15 /M16 30 Rd Mags
-
- 
-
Magpul appeared out of nowhere a few years back and quickly became
the industry standard bearer in AR-15 mags and related accessories.
Take a look at these Specs.
Features
•Impact and crush resistant polymer construction
•Constant-curve internal geometry for smooth feeding
•Anti-tilt, self-lubricating follower for increased reliability
•Multi-use Impact/Dust Cover keeps dust and dirt out of the
magazine during storage and protects the feedlips from potential hard
impact damage during transit
•USGI-spec stainless steel spring for corrosion resistance and
field compatibility
•Textured gripping surface and flared floorplate for positive
magazine handling and easy disassembly
Item # MP30-223.................$12.99
WHAT
ABOUT THIS
T-14 .410 GAUGE UPPER
This is one of our most popular Items
Note: In the past these uppers have been made of a poly-carbon
material but our latest batch features All Aluminum Construction
IF YOU ARE LIKE ME YOU ALREADY HAVE
AN AR-15 RIFLE OR TWO. HOW WOULD YOU LIKE TO TURN IT INTO A SHOTGUN?
WELL, HERE IS YOUR CHANCE. THIS T-14 .410 AR UPPER WILL DROP ON TO
ANY ANY AR-15 LOWER AND JUST LIKE THAT, AN AR-15 .410 SHOTGUN. 20"
BBL, A-2 MICROMETER ADJUSTABLE SIGHTS, AND AN A-3 REMOVEABLE CARRY
HANDLE WITH A WEAVER STYLE FLAT TOP BELOW.
COMES WITH ONE 5 ROUND MAG. MAG FITS AND LOCKS INTO YOUR EXISTING
MAG WELL.
HIGH CAP MAGS AVAILABLE . HIGH
QUALITY, ALL ALUMINUM CONSTRUCTION.....
THIS IS THE NEATEST THING SINCE SLICED BREAD...
NO FFL REQUIRED
ITEM # T14-UPPER..........................$349.99
ORDER
ON-LINE NOW!
Need a Nice Collapsible Stock For Your AR-15?
U.S. Assembled AR15 6-position Stock Assy w/
U.S. Made Mill-Spec Tube - Black
Detail Information:
• US Made Mil-spec, Tight Tolerance 6-position Extension Tube
for Solid Adjustment
• Stock Molded from Impact Resistant Advanced Polymer
• Complete with Springs, High Quality Aluminum Buffer, Tear-drop
Ring and Locking Ring
These same stocks are in use by numerous law enforcement as well as
military agencies and are the stocks used on our Rocky Point Rifles
above.
ITEM # UTGAR-ST..........$44.99
ORDER
ON-LINE NOW!
NEED A CARRY HANDLE / A-2 SITE FOR
THAT FLAT TOP.
- 
CHANGE THIS ....... INTO THIS
• Exact Precision/Tolerances to Fit All AR-15
Flat top Variants
• Superior Quality Locking Plate
• Excellent Quality Thumb Nuts with Retention Design
• Precision Windage/Elevation Adjustments
• Solid Aluminum/Steel Construction with Matte Black Finish
THESE ARE THE BEST AVAILABLE ANYWHERE.....INSTALLS
IN SECONDS
ITEM # UTG-MNT-950..........$39.99
ORDER
ON-LINE NOW!
 |
THEY'RE
BACK
|
|
AR-15
100 ROUND DUAL DRUM MAGS
- 
THESE ARE SUPER NICE. THEY ARE MANUFACTURED IN SOUTH KOREA FOR THE
KOREAN MILITARY FOR USE IN THEIR M-16 RIFLES BUT WORK EQUALLY WELL
IN AR-15'S. MADE TO EXCEED NATO SPEC'S.WE HAVE CARRIED THEM IN THE
PAST AND DID VERY WELL WITH THEM BUT THEN THE IMPORTERS RAN OUT AND
THERE WERE NO MORE TO BE FOUND. WELL, WE JUST PICKED UP 11 PIECES
FROM A LOCAL DEALER WHO WENT OUT OF BUSINESS. THESE ARE ALL NEW IN
THE BOX AND COME COMPLETE WITH ALL OF THE COMPONANTS YOU SEE IN THE
PHOTO PLUS AN OWNERS MANUAL. THE PUSH IS ON ONCE AGAIN TO
BAN HI-CAP MAGS AND THESE ARE AT THE TOP OF THE LIST. DON'T HESITATE.
GET YOURS TODAY.
ITEM # AR100-DD.................................$149.99
........$129.99
ORDER
ON-LINE NOW!
OTHER COOL STUFF
-------------------------------------------
U.T.G Model 4/15 Dual Use Ring Mount
For Either Carry Handle or Flat Top Rifle
- 
- 
One of the finest dual use mounts I have ever seen.
Mounts directly to a Flat-Top and allows See-Thru capability for open
sites plus raises rings above front site plane for scope use. Also,
converts in seconds for use with carry handle while still retaining
see-thru capabilities. Locks in to same point every times so installs
and removes while maintaining zero.
Built in 1" rings included. If you own an Ar-15 Rifle, get one
of these......Look at these features.
• Robust and Solid Carry Handle Mount Complete
with 1" Integral Rings
• Three Adjustable Mounting Positions to Tightly Secure the
Carry Handle and Allow for Flexible Eye Relief Adjustment
• Designed with Integral Ring Mount Support for Hard Tactical
Use
• Additional Flat Top Adaptor with 2 Thumb Screws and Clamping
Plate
ITEM # AR-DUSM.......................$19.99
Note -This mount does not include the carry handle
but simply acts as a mount for either.
If you need a carry handle please see our MNT-950 mount
above.
ORDER
ON-LINE NOW!
------------------------------------------
ALREADY HAVE A CARRY HANDLE ON YOUR RIFLE AND
JUST NEED A GREAT MOUNT AT A GREAT PRICE?
U.T.G. AR-15 CARRY HANDLE SCOPE MOUNT
- 
GREAT MULTI SETTING SEE THRU MOUNT FOR ALL AR-15 CARRY HANDLE RIFLES.
ACCEPTS ALL WEAVER RINGS, NO GUNSMITHING REQUIRED, LOOKS GREAT, WORKS
GREAT.
• Superior Mil-spec Quality and Design for Serious
Use at A Fraction of the Cost • Solid Machined Construction
with Black Matte Finish
* Takes Standard Weaver Rings or STANAG Rings, and Has 12 Slots
• See-thru Mount Seats Neatly Inside the Carry Handle and Secured
with A Knurled Thumbscrew
ITEM # AR-SM..............$9.99
ORDER
ON-LINE NOW!
BARSKA MULTI RETICLE ELECTRO SIGHT
- 
Just like the ones used by our troops. Multi-Reticle
Electro Sight, 1x, 22x33mm Quick Acqusition Shooting Sight. High impact
rated to with stand large caliber punishing recoil. Multi-reticle
panoramic sight, built with a standard 5/8” mount that is ideal
for handgun, shotgun, crossbow,AR-15, M-16 and more. Features 4 different
reticle patterns, a 7-position rheostat illumination and powered by
a lithium battery. With a screen size of 22mmx33mm, this sight provides
unlimited eye relief and unlimited field-of-view. Perfect for quick
target shooting.
Model # AC10632, Magnification 1x,
Objective Lens 22-33mm, Reticle Multi Reticle, Optical Coating Multi
Coated
Field of View (ft@100yds/m@100m) 51.84@1x, Eye Relief Unlimited, Adjustment
Knob Adj. rheostat settings
Finish Black Matte, Weight 4.06 oz., Length 3.125 inch, Included Accessories
Battery and Lens Cloth
Warranty 1 Year Limited Warranty
Item # BARSKA-MRES..............................$49.99
ORDER
ON-LINE NOW!
WANNA SEXY SHORT SCOPE FOR YOUR AR-15?
WELL HERE IT IS!!!!!!!
THE UTG 4X32 MINI RUBBER ARMORED SCOPE
U.T.G. 5th GENERATION 4X32
Compact Rubber Armored Mil-Dot RBG Illuminated AR-15 Rifle Scope With
Multi-Mount and Rings.
• Built On The True Strength(TS) Platform
With Revolutionary Triple S Structure (Smart Spherical Structure)
for the Most Effective Telescopic Functions
• High-tech "STEALTHLY" Rubber Coating to Absorb Recoil
and Protect all Scope Internal and External Components
• Side Wheel Red/Green Dual Illumination Rheostat for Most Versatile
Weather and Light Conditions
• Integral See-Thru Carry Handle Mount and Flat Top Adaptor
• For Best Fit and Most Versatile Applications
• Provides Superior Shockproof, Fogproof and Waterproof Capabilities,
Completely Sealed and Nitrogen Filled to Prevent Fogging
• Flip-open Lens Caps
THESE LITTLE RASCALS ARE REALLY NICE AND HAVE
TONS OF FEATURES.
ASK FOR ITEM # UTG-AR-RASS...................$69.99
ORDER
ON-LINE NOW!
WANT A FULL SIZE SCOPE?
HERE IS WHAT WE RECOMMEND
-
U.T.G. 3X9X40 RUBBER ARMORED RETICLE INTENSIFIED TACTICAL OPS SCOPE
THIS IS A WHOLE BUNCH OF SCOPE FOR A LITTLE BIT OF
MONEY.
COMES COMPLETE WITH MOUNTING RINGS
JUST LOOK AT THESE FEATURES
• Dynamic Scope Body Design Featuring Side-Wheel
Red/Green Illumination Rheostat
• Built on True Strength Platform, Completely Sealed and Nitrogen
Filled, Shockproof, Fogproof and Rainproof
• Well-Balanced True Hunter Brass Ergonomic W/E Knobs
• Revolutionary Triple S Structure (Smart Spherical Structure)
TS Construction for the Most Effective Telescopic Functions
• Adopts the Latest Technological Advancement and Uses Precision
Machine Parts and Lens Elements
• Features Rugged , High-Tech "STEALTH" Rubber Coating
to Absorb Recoil and Protects all Scope Internal and External Components
• Perfect for All Terrains and All Weather Conditions
• Precise and Most Accommodating Windage/Elevation Adjustments,
Exc ellent +/- 40MOA
• Includes New Generation Custom Fitted Rings for Weaver/Picatinny
Rails, Allowing Best Fitting Clearance for Most Popular Rifles
• Built-In User-Friendly Flip-open Lens Caps
• A Great Scope Very Well Recognized By Elite Shooters And Applications
as Having the Most "STEALTHY" Elements
Mil dot range estimating reticle • Parallax Adjusted at 100
Yards
DON'T MISS THIS GREAT DEAL.... ITEM # UTG-FSRAS........$69.99
ORDER
ON-LINE NOW!
------------------------------------------------------------------------
Ergonomic
Ambidextrous 5-position Foldable Foregrip
• 5 Adjustable Foregrip Positions
• Ergonomic Finger Grooves for Most Comfortable Grip
• Clever End Cap Conceals Battery Storage and Controls Grip
Mounting
• Practical Side Slides Allow for Ambi Use of Pressure Pad
• Simple Slide-on Mounting Deck for Most Solid Installation
These are super nice and fit any type of
weaver rail fore weaver style forearm rail system. Image above shows
an AR-15 but works equally well on AK rifles or any rifle with a
weaver rail on the foregrip. Will lock up on aluminium or polymer.
Easy on and off. A great looking and practical addition to you rifle.
Affordable too. Order Now.
Item # UTG-FFG.......................$19.99
ORDER
ON-LINE NOW!
UTG Covert
Op Quick Detach
Aluminum Grip with Built-in LED Light
• UTG Combat Aluminum
Foregrip with Built-in LED Flashlight
• ntegral Picatinny/Weaver Style Mounting Deck with QD Lever
Lock, Fully Adjustable to Fit on any Picatinny/Weaver Rail
• Best in Class CREE Q5 LED with Integrated Reflector and
Light Bulb to Provide Instant Spot Focus for Clear Object Identification.
Comes complete with 2 lithium batteries.
• Combat Tactical Front Head
• Heavy Duty Ambidextrous Push Button On/Off Switch
• Unique Textured Surface for Most Solid Grip
• Light Weight Design, Precision Machined from Aircraft-grade
Aluminum Alloy with Anodized Black Matte Finish
Not only is this a great grip. It is also a great LED Light. When
its not on my rifle I keep mine by the bed for a really nice led
flashlight. Tough aluminum construction. Images above shows item
on the AR-15 but works equally well on the
AK-rifles or any rifle with a weaver style rail on the foregrip.
Comes complete with 2 lithium batteries
This is one of those items that I am not able to get a good photo
image of but it looks really impressive in person.
Trust Me... These are Nice..... Get yours today..
Item # UTG-LEDFG........................$
54.99
SPECIAL
PURCHASE
Simmons 8 Point 3x9x40 Variable Power
Scope
The Simmons 3x9x40 , 8-Point riflescope offers more high-quality features
than any other scope in its class. It come with fully coated optics
for a brighter, higher-contrast image, and 1/4-MOA SureGrip™
audible-click windage and elevation adjustments for effortless adjustment.
Includes many premium features – like the TrueZero™ windage
and elevation adjustment system that stays locked tight to zero, through
even the most strenuous conditions, and the QTA™ eyepiece for
easy target acquisition. Standard 1" tube works great with all
1" diameter rings. Waterproof, fogproof and recoilproof, the
8-Point delivers outstanding precision in a basic riflescope. A value
that makes it as easy to mount on your rifle, as the mounts you’ll
be hanging on your wall.
Item # Sim-8PT-RS-------------------$39.99
ORDER
ON-LINE NOW!
NEW BARSKA PRO
HUNTER 3X12X50
ILLUMINATED RETICLE SCOPE
BARSKA 3-12x50 IR HUNTMASTER PRO SCOPE AC10056
3-12x50 IR, Huntmaster Pro, Black Matte, 30/30 IR Cross, 1/4"
MOA, Waterproof, fogproof and shockproof Large objective lens for
increased light transmission Multi-Coated optics Sleek, sturdy construction
Parallax-free at 100 yards, Fast focus eyebell, For low-light and
dark backgrounds hunting conditions, center-lit illuminated reticle
with 11 brightness settings so you won't ever have to worry about
disappearing crosshairs in low-light conditions, Scope caps included,
Backed by Barska's Limited Lifetime Warranty
The ideal scope to use when lighting conditions aren’t
ideal.The Huntmaster Pro series gives new meaning to the “perform”
in performance high quality optics, rugged construction and hair-splitting
accuracy. The Huntmaster Pro is built with an advanced technology
center-lit illuminated reticle with 11 brightness settings so you
won’t ever have to worry about disappearing crosshairs in low-light
conditions.
With its fast focus eyebell, large objective lens and multi-coated
optics, delivers clear high contrast views and dead on accuracy.
Look at these Features
Model # AC10056 ,Magnification 3-12x Objective Lens
50mm, Waterproof Yes, Fogproof Yes
Reticle 30/30 IR Cross, Exit Pupil 16.7-4.2mm
Optical Coating Multi Coated, Field of View (ft@100yds/m@100m) 35/11.6@3x,
10/3.3@12x Eye Relief 2.7 inch
Click Value 1/4", Adjustment Knob Adj. rheostat settings, side
adj. windage and elevation
Tube Diameter 1 inch, Finish Black Matte
Weight 21.34 oz., Length 13 inch
Included Accessories Battery and Lens Cloth , Warranty Limited Lifetime
Warranty
WE GOT A GREAT DEAL ON A SMALL LOT OF THESE AT THE
SHOT SHOW AND THEY JUST ARRIVED.
ITEM # BARSKA SCOPE............$75.00
EACH
ORDER
ON-LINE NOW!
ORIGINAL
ROMANIAN 3.5 POWER
PSL / FPK SCOPES IN STOCK NOW
We
just got a price reduction on these so we are passing it on to you.
At this price, everyone should have one
ITEM # PSL-SCOPE......$139.99.......$99.99
ORDER
ON-LINE NOW!
UTG
978 SIDE RAIL AK SCOPE MT
• New Gen. AK Double Rail Side Mount Designed with Quick Detachable/Lock
Lever
• Fully Adjustable for Most Side Rail Variants
• Precision Machined to Fit Most AKs and AK Variants
• Machined from Aircraft Grade Aluminum for Extreme Strength
• Double Picatinny Rails for Scope & Versatile Accessory
Applications
• STANAG Dimension and 12 Slots on Top Rail, 8 Slots on Side
Rail
• Optimal Clearance to Fit All Tactical Scopes Right on Top
of Bore Centerline
ITEM
# UTG-MNT978..................$29.99
ORDER
ON-LINE NOW!
Just In - Two of the finest Multi Purpose Vertical
Grips Ever
BSA RD30 Illuminated Sight
The BSA Multi-Purpose Sighting Systems are a wonderful
light weight sight for close quarter and medium range targets. Light
enough for small calibers plicking on the range, yet durable enough
for larger calibers used by hunters and law enforcement departments.
SPECIFICATIONS -
Magnification 1X, Obj. Lens Diameter (mm) 30, Exit Pupil Range (mm)
30, Field of View @100 Yds 68
Optimum Eye Relief (in) UNLIMITED, Parallax Setting 50 yds., Click
Adjustment Value 1/2, Adjustment Range 45 - 45
Transmission (%) Day/Night, Weight (ounces) 5.00
Item # BSA-RD30................................$24.99
ORDER
ON-LINE NOW!
Huntsman 3 Color Option Illuminated Dot Sight
The BSA Multi-Purpose Sighting Systems are a wonderful light weight
sight for close quarter and medium range targets. Light enough for
small calibers plicking on the range, yet durable enough for larger
calibers used by hunters and law enforcement departments. Reticle
allows user to select from red, green or blue dot setting depending
on background.
SPECIFICATIONS
Magnification 1X, Obj. Lens Diameter (mm) 20, Exit Pupil Range (mm)
20, Field of View @100 Yds 45, Optimum Eye Relief (in) UNLIMITED,
Parallax Setting 50, Click Adjustment Value 1/4, Adjustment Range
45-45, Transmission(%) Day/Night, Weight (ounces) 5.00
Item # BSA-RD20RGBCP...........$29.99
ORDER
ON-LINE NOW!
WHAT
A GREAT PROMO
FIVE PIECE BIG GAME BUTCHER SET
5 piece Butchers set in folding carry/storafe case... These are nice.
Item # Butcher Set...............$19.95
BUY ANY RIFLE, AND GET ONE OF THESE COOL MEYERCO BUTCHER SETS FOR
ONLY $12.50
Champion Model 40974 Electronic EarMuffs
Enjoy safe shooting with new sound dampening ear muffs from
Champion®. These comfortable, stylish muffs provide superior hearing
protection while remaining light and comfortable for the shooter.
Available in either standard or electronic versions, they reduce harmful
noise levels and
provide a comfortable fit for those long days of shooting. Don't let
your shooting passion damage your hearing-rely on Champion protection
when at the range or in the field.
Features & Benefits ,•Noise
reduction for superior auditory protection., •Collapsible
for easy storage, Adjustable for best fit
•Electronic muffs to amplify quiet sounds and
protect against harmful noise levels (NRR 21dB)
40974 Ear Muffs - Electronic; 25dB NRR MSRP $39.99
ORDER
ON-LINE NOW!
We sell these at a great price
and simply can't keep them in stock.
Grab a pair or 2 now while they are still here
Item
# CHAMP-EEM.............$29.99
Buy any firearm on the site and get these for only $24.99
NEW ITEM
AK / SKS STOCK EXTENSION
-
WE HAVE BUTTPAD / STOCK EXTENSION
FOR BOTH THE SKS AND THE AK-47 RIFLES. tHESE STOCK EXTENSIONS PROVIDE
NOT ONLY EXTRA PADDING AGAINST RECOIL, BUT EXTRA LENGTH FOR FOR COMFORT.
ADDS AN EXTRA 1 TO 1.5 INCHES TO THE DROP OF THE RIFLE. HOLE IN THE
MIDDLE ALLOWS CONTINUED ACCESS TO CLEANING KIT. EASY TO INSTALL. SIMPLY
REMOVE SCREWS FROM EXISTING BUTTPLATE AND RESET THOUGH CORRESPONDING
HOLES IN PAD.
A GREAT YET INEXPENSIVE ACCESSORY ITEM.
ITEM #KF-BP.............$7.99 Ea.
ITEM # SKS-BP............$7.99 Ea.
ORDER
ON-LINE NOW!
TAPCO
G-2 TRIGGER GROUP
WE SELL, AND ENDORSE THE TAPCO MANUFACTURED U.S. G-2 TRIGGER GROUP.
A GUY ASKED ME ON THE PHONE ONE DAY, HOW COME YOU REFER TO OTHER COMPANIES
BY NAME ON YOUR SITE? HE SAID "DONT YOU REALIZE THATS ITS FREE
ADVERTISING FOR THEM". WELL , YES I DO. BUT MY BELIEF HAS ALWAYS
BEEN THAT BLOWING SOMEONE ELSE LIGHT OUT, OR IN THIS CASE KEEPING
IT HID UNDER A BUSHEL, JUST DOESN'T MAKE YOUR LIGHT SHINE ANY BRIGHTER.
BESIDES, THEY MAKE A GOOD PRODUCT, RUN A TOP NOTCH OUTFIT AND HAVE
ALWAYS BEEN REALLY GOOD TO ME. ANYWAY IF YOU WANT ONE OF THESE TRIGGER
GROUPS WE HAVE THEM. ASK FOR THE G-2 SINGLE HOOK TRIGGER...
US-AK-G2....................................................$29.99
ORDER
ON-LINE NOW!
Timbersmith Romanian
AK Stock Sets
-
-
- 
The TimberSmith™ Romanian
AK-47 Wooden Stock Set is the standard in wooden rifle stocks. This
master crafted set is an ideal enhancement to any Romanian AK-47 if
you want to maintain its original elegance. Every set is hand picked
to ensure that there is a consistant finish, front to back. The handguard
is designed with a palm swell for optimum comfort and handling and
has a pre-drilled hole to accommodate the cleaning rod. The pistol
grip comes complete with new production grip screw, washer and bushing
ensuring proper installation. The buttstock comes with a preinstalled
metal buttplate and metal side sling swivel and includes all the hardware
needed for installation. On top of all of these features, every piece
is 100% Crafted in the U.S.A. making this set counts as 3 U.S. 922r
compliant parts.
Item Specifications:
Length Of Pull: 13.25"
Designed to Fit on the Romanian AK-47 Rifle Variant
100% Crafted in the U.S.A.
The Set Counts as 3 U.S. 922r Compliant Parts (Handguard, Buttstock,
and Pistol Grip)
Set Includes:
- Black Laminate Buttstock with pre-installed Metal Buttplate and
Sling Swivel, and Tang Screws
- Black Laminate Upper and Lower Handguard with Pre-Drilled Cleaning
Rod Hole
- Black Laminate Pistol Grip with Grip Screw, Washer and Bushing
Note: Due to the nature of the laminate process, finishes will vary.
The black laminate will contain layers of brown, gray and black. The
amount of each color will vary from set to set.
These are Gorgeous.... Nicest Ak Stock Sets
Ever Made
Black Laminate..... Item # TIM06000-BL...............$119.99 ( In
Stock )
Brown Laminate..... Item # TIM06000-BR...............$119.99 ( Out
Of Stock )
Red Laminate......... Item # TIM06000-RL..................$124.99
( Out Of Stock )
U.S.
Mfg Black Polymer AK Buttstock
High quality AK buttstock fits all stamped
AK Rifles. These are the same buttstocks we use on our conversions
and they are very nice. Counts as a sec 922r compliance part.
Item # US-AK-BS.........................$29.99
ORDER
ON-LINE NOW!
Intrafuse AK-47 Handguard Set
- 
We think this is the nicest, most versatile
AK Forearm set on the market today. Features a hide-a-way rail systeem
for lasers, mounts, etc. We show it above mounted on one of our chrome
AK variations.
Comes complete with forearm and upper handguard....
Item # STK06311.........................$39.99
ROMANIAN
AK BAYONETS
HERE'S THE DEAL. CENTURY ARMS
IS OUT OF THESE AND IS NO LONGER SENDING THEM OUT WITH THE RIFLES.
HOWEVER, MANY PEOPLE ARE TELLING US THAT THEY STILL WANT THE BAYONETS.
SO HERE IS WHAT WE DID.
WE BOUGHT
UP EVERY ROMANIAN BAYONET WE COULD FIND. AS SUCH WE NOW HAVE SOME
IN STOCK. WE HAD TO PAY A PREMIUM FOR THEM SO WE CAN'T JUST LET THEM
GO WITH THE RIFLES. BUT WE WILL OFFER YOU A GREAT PRICE. IF YOU WANT
ONE WITH A RIFLE THE PRICE
WILL BE EVEN BETTER. THESE ARE ALL VERY NICE WITH THE RUBBER INSULATOR
AND ARE MUCH BETTER THAN THE ONES THAT WERE COMING WITH THE RIFLES.
ITEM # ROM-BAYO........$17.99
WITH PURCHASE OF RIFLE.........$12.50
ORDER
ON-LINE NOW!
RARE FIND
CHINESE AK BAYONETS
WHILE LOOKING FOR SOME ROMANIAN BAYONETS,
WE RAN ACROSS THESE, AND I JUST COULD NOT RESIST. THE CHINESE BAYONETS
WERE ALWAYS MY FAVORITE AND THESE ARE BRAND BEW STILL IN THE INDIVIDUAL
PLASTIC WRAPS. CHINESE BAYONETS HAD A FULL BAKELITE HANDLE AND HANDGUARD
AND ALSO HAD A HIGH QUALITY STEEL BLADE THAT COULD BE SHARPENED AND
ACTUALLY HOLD AN EDGE. IN FACT THESE HAVE A FAIRLY SHARP EDGE STRAIGHT
OUT OF THE SHEATH. UNFORTUNATELY MY PHOTO DOES NOT ALLOW ME TO SHOW
THE TRUE QUALITY AS BLACK BAKELITE IS VERY DIFFICULT TO PHOTOGRAPH
TO SHOW DETAIL, BUT BELIEVE ME... THESE ARE THE NICEST OF THE NICE.
FITS VIRTUALLY ALL AK RIFLES WITH A BAYONET LUG...WE SELL THEM INDIVIDUALLY
OR AT A DISCOUNT WITH A RIFLE.
ITEM
# NOR-BAYO........$24.99
WITH PURCHASE OF RIFLE.........$19.99
ORDER
ON-LINE NOW!
AK / SKS WINDAGE AND ELEVATION
SITE TOOL
This tool is invaluable for
getting your rifle sighted in for 100% accuracy. The C-Clamp is open
on the pressing end to allow the site base to drift through left or
right to lock in accurate windage.
The T-Handle also includes a nipple wrench for adjusting, removing,
or re-inserting the site post.
Item # SKAKWE...................$9.99
ORDER
ON-LINE NOW!
AK 74 STYLE COMPENSATOR FOR 7.62X39
AK RIFLES
AK-74 type muzzle break for all threaded
bbl 7.62x39 AK type rifles. Open chamber with 2 gas ports minimizes
the muzzle rise and redirects propellant gases with the effect of
countering both recoil of the gun and unwanted rising of the barrel
during rapid fire resulting in increased accuracy less felt recoil
and more rapid follow up shots without having to re-acquire the bullseye.
Description: AK-Muzzle Brake, Length: 2.812 inch, 14.1 Left Hand
Thread, Material: Steel, Color/Finish: Black/ Matte
Applicable Firearms: AK Type 7.62x39 rifles
Item # AK74T-AK-Comp...........................$17.99
ORDER
ON-LINE NOW!
WHILE WE ARE AT IT
WE NOW HAVE CLEANING
RODS FOR AK RIFLES
- 
TO ME AN AK JUST DOES NOT LIIK COMPLETE WITHOUT A CLEANING ROD. WE
MAKE SURE THAT EVERY AK RIFLE HERE THAT ACCEPTS A RTOD HAS A ROD BEFORE
IT LEAVES HERE. HOWEVER THERE ARE THOUSANDS OUT THERE THAT
EITHER HAVE NO ROD OR HAVE LOST THEIR ROD. THEREFORE, WE HAD SOME
MADE FOR YOU. THESE RODS ARE JUST LIKE THE ORIGINAL EXCEPT BETTER.
BECAUSE THEY ARE BRAND NEW. IF YOU NEED AN AK CLEANING ROD TO MAKE
YOUR RIFLE COMPLETE WE HAVE THEM IN STOCK.
THESE RODS FIT ALL STANDARD 16.5" BBL STAMPED RECEIVER AK RIFLES.
ITEM # AK-CR.. $9.99 EA
ORDER
ON-LINE NOW!
LOOK : DRACO CLEANING RODS
- 
CENTURY NO LONGER HAS CLEANING RODS FOR THE DRACO PISTOL EITHER. BUT
DARN IT, SOMETIMES YOU JUST GOTTA TAKE THE BULL BY THE HORNS.
WE HAD SOME RODS MADE FOR THESE TOO. THEY TURNED OUT GREAT
AND FIT PERFECTLY.... DON'T GO ROUND WITHOUT ONE....
ITEM # DRACO ROD............ $9.99
ORDER
ON-LINE NOW!
GOTTA
SIDE RAIL ON YOUR AK? - WANNA SCOPE IT?
WELL HERE YOU GO
UTG 973 SIDE RAIL AK
SCOPE MT
Detail Information:
• Rock Solid AK Double Rail Side Mount Precision Machined to
Fit Most AKs and Variants
• Machined from Aircraft Grade Aluminum for Extreme Strength
• Double Picatinny Rails for Scope & Versatile Accessory
Applications
• STANAG Dimension and 12 Slots on Top Rail, 8 Slots on Side
Rail
• Optimal Clearance to Fit All Tactical Scopes Right on Top
of Bore Centerline
.Fits all Romanian AK Rifles and most others with a side rail
ITEM # MTK-75...$26.99
ORDER
ON-LINE NOW!
ACCUSHOT MED PROFILE
3RD GENERATION WEAVER RINGS
• Precision Machined from Aircraft-grade Aluminum
Alloy with Anodized Black Matte Finish
• Friendly Hex Screws with Retention Features and Full Length
Locking Plate to Guarantee Easy Installationand Secure Fit, Thumbscrew
type but also includes all hex wrenches for tightening . • Fits
All Picatinny/Weaver Rails
Perfect for the mount above or any application requiring Weaver Rings.
Very high quality.
ITEM # AS-RINGS................$9.99 / Pair
ORDER
ON-LINE NOW!
ORDER
ON-LINE NOW!
AK-30 ROUND MAGS
- - 
WE OFFER 2 DIFFERENT CHOICES ON AK-30 ROUND MAGS. THE
MAG ON THE LEFT ( FACING ) IS A
30 RD ZYTEL POLYMER MAG BY TAPCO. THEY HAVE A GREAT DESIGN, FEED FLAWLESSLY
AND CARRY A LIFETIME MANUFACTURERS WARRENTY. BEST OF ALL THEY ARE
MADE IN THE U.S. AND COUNT AS 3 COMPLIANCE PARTS IF YOU HAVE ANY 922r
ISSUES. SOME PEOPLE HAVE AN AVERSION TO POLYMER MAGS BUT WE HAVE USED
THESE EXTENSIVELY NOW AND THEY FIT, FEED AND FUNCTION GREAT. AND THEY
LOOK GOOD TOO. THE POLYMER ABSORBS MY FLASH AND I CAN'T TAKE A GOOD
PHOTO OF THESE BUT THEY LOOK GREAT. BEST OF ALL THEY ARE STILL AFORDABLE.
U.S. MFG POLY MAG W/LIFETIME WARRENTY..,US-AK30......$14.95.......
$12.50
THE 2ND MAG YOU SEE ABOVE IS AN EASTERN
BLOC, PROBABLY HUNGARIAN, ALL STEEL 30 RD RIBBED BACK MAG. THE MAGS
MAY HAVE SLIGHT USE OR SOME STORAGE MARKINGS BUT ARE IN OVERALL EXCELLENT
TO LIKE NEW CONDITION. THE ONE YOU SEE IN THE PHOTO IS A REALLY GOOD
REPRESENTATION OF WHAT YOU WILL RECEIVE. NICE AK MAGS ARE GETTING
HARD TO COME BY SO IF YOU WANT SOME REALLY HIGH END MAGS ACT FAST.
EASTERN BLOC STEEL SURPLUS MAG EXCELLENT.....
AK-30.....$14.95... $12.50
ORDER
ON-LINE NOW!
WHAT A FIND
BULGARIAN POLYMER AK 30 RD MAGS
- 
THE CADILLAC OF ALL POLYMER AK MAGS. THESE ARE THE
MAGS I HAVE IN MY PERSONAL SHOOTERS BAG. BULGARIAN PRODUCTS ARE SYNONOMUS
WITH QUALITY IN ALL THINGS AK RELATED AND THESE MAGS ARE NO EXCEPTION.
PROVIDES A SUPERIOR FIT AND FEED TO ALMOST ANYTHING ON THE MARKET...
LOOKS COOL TOO. LIMITED QTY'S STOCK UP NOW.
ITEM # AK30-BUL...........................$14.50
EACH
ORDER
ON-LINE NOW!
BRAND NEW 40 ROUND AK MAGS
WE GOT 500 OF THESE GREAT MAGS IN FOR
THE FIRST TIME A FEW MONTHS AGO AND THEY SOLD OUT SO FAST IT MADE
OUR HEAD SPIN. FORTUNATELY WE WERE ABLE TO GET IN SOME MORE. EVEN
BETTER WE ARE GOING TO HOLD OUR ORIGINAL PRICE FOR AS LONG AS WE CAN.
THESE ARE BRAND NEW AK-47 40 ROUND MAGS. THESE MAGS ARE MADE IN KOREA
ON A MILITARY CONTRACT AND THEY ARE THE NICEST 40 ROUNDERS I HAVE
EVER SEEN. RATHER THAN BEING BLUED, THESE MAGS HAVE A SLATE GREY PARKERIZED
COATING SO THEY MAY NOT MATCH YOUR RIFLES FINISH EXACTLY, BUT AS FAR
AS QUALITY IS CONCERNED THEY CAN'T BE BEAT..... RIBBED REINFORCEMENT
RAIL BACKING,
BRAND NEW PRODUCTION......STOCK UP NOW...
ITEM # KOR-AK40............... 24.99............
$19.99
ORDER
ON-LINE NOW!
NEW ROMANIAN (CHINESE STYLE) 75 RD AK DRUM
THESE DRUMS WERE MADE NEW IN ROMANIA BUT ARE BUILT
ON THE CHINESE DESIGN. THAT MEANS THAT THE BACK OPENS TO LOAD AND
THEY WIND TO ADD TENSION OR YOU CAN LEAVE THEM LOADED BUT UNWOUND
TO SAVE TENSION ON THE SPRINGS. THESE ARE THE BEST.I HAVE TAKEN A
PHOTO OF 3 OF THEM HERE SO THAT YOU CAN SEE THE FRONT, THE BACK, AND
THE WAY EACH ONE COMES PACKAGED RUST WRAPPED WITH EACH DRUM IN ITS
OWN INDIVIDUAL BOW. THEY ALSO COME WITH A MANUAL AND STEP BY STEP
INSTUCTIONS FOR STORING AND LOADING. DRUMS THIS NICE HAVE NOT BEEN
AVAILABLE IN THE COUNTRY IN SEVERAL YEARS AND COULD DISAPPEAR AGAIN
QUICKLY... ORDER NOW......
ITEM # AK-75 ROM......$99.99
ORDER
ON-LINE NOW!
 |
AK RECOIL
BUFFERS
Long lasting thick design is perfect for your
AK47, AKM, and AK74 weapon systems. Also works great with saiga
rifles and shotguns or anything with an AK type recoil spring.
These buffers help reduce felt recoil, make the weapon more
controllable, help with effective follow up shots and increase
the life of the weapon. Slips over the return spring assembly
and sits in the rear portion of the receiver. Eliminates the
metal to metal contact from the bolt carrier and rear stock
trunnion.This is a great investment and low cost way to extend
the life of your AK or AK type rifle.
ITEM # AK-BUFFER..................$9.99
ORDER
ON-LINE NOW! |
Bulldog 25" Tactical Case
Fantastic tactical nylon case with
carry handles and shoulder strap.
Also incorporates 3 mag pouches and a zippered accessory pouch.
These work great for Uzi's, our PPS type firearm, Mini Draco's etc.
Bulldog claims these float too but I've never thrown one in the pond
to find out.
I do know they are some of the nicest soft cases on the market.
Twenty Five inches straight across but you get a little more diagonally.
A great way to carry and protect your investment
Item # BDR-25...........................$29.99
ORDER
ON-LINE NOW!
Bulldog Tactical Rifle Case
Fantastic
tactical nylon case with carry handles and shoulder strap. Also incorporates
4 mag pouches and a zippered pouch. These work great for AK's , AR's,
H & K's, and numerous other types os rifles type firearm, etc.
Mag pouches accept Hi-cap mags up to the ak-30 round and similar length.
Comes in green or black, ( green pictured ) depending on which ones
are available at the time.
We offer 2
diffent lengths, 35" and 40", to suit your particular need
Item # BDR-35...........................$29.99
Item # BDR-40..............................$29.99
ORDER
ON-LINE NOW!
Bulldog 44" Scoped Rifle / Shotgun Case
This is the same case we offer with our Saiga
12 gauge shotguns in our Shooters packages. Will actually hold the
Saiga 12 with the magazine inserted... Also great for scoped rifles.
Item # BDR-44..........................$24.99
ORDER
ON-LINE NOW!
Allen
Camo Padded Nylon Rifle / Shotgun Case
This
is one of those instances where a bad thing works out for a good ending.
Allen is one of the biggest, oldest, and most trusted names in the
firearms accessory business. We recently took on some of their product
line but somehow our initial order got data entered incorrectly and
we ended up getting 1000 of these cases. Now granted , we think they
are great cases. They are autumn camo pattern, well made, heavily
padded, and fit any non-scoped rifle or shotgun up to 52"in length.
Water resistant nylon outer with thick foam padding and soft black
flannel lining.
They also have a double stitched, riveted hanging loop on the end
for hanging on a field camp hook or tree limb.
Still, these are somewhat out of our product line and we would have
never carried them or ordered this kind of quantity and all of a sudden
the truck shows up with several pallets of them. Well, here is where
the bad, turns into good. We contacted Allen, and they found out it
was indeed a data entry error on their part and they had shipped them
out by mistake. Still, it was going to be expensive on them to have
them shipped back so they offered us a deal that we just couldn't
turn down to keep them. As a result.... you the customer are the winner.
DUDE, THAT WAS A LONG STORY TO EXPLAIN WHY YOU CAN
BUY THESE AT SUCH A GREAT PRICE...
BUT IT DID LEAD TO THIS GREAT DEAL.
CALL YOUR FRIENDS, TELL YOUR NEIGHBORS, AND BUY ALL YOUR KIN FOLKS
ONE FOR CHRISTMAS.....2 FOR YOUR MAMA...
ITEM # ALLEN-RC-450A...........................$9.99
ORDER
ON-LINE NOW!
Mosin Nagant Monte Carlo Stock
Convert Your Mosin Nagant into a Modern Hunting Rifle!
These are fantastic, gives your Mosin Nagant
the look and feel of a modern hunting style firearm. Because it eliminates
the handguards and the barrel rest on a series of vents it basically
free floats the barrel and also aids in accuracy. We are building
our heavy barrel rifle on these but all standard nagant style rifles
work equally well. Raised Monte Carlo style cheekpiece checkered forearm
and european drop styled pistiol grip. This stock also helps tame
the recoil and makes your hard hitting Nagant Rifle an absolute pleasure
to shoot.
•Rubber Buttpad, •Raised Cheekrest, •2
Sling Swivel Studs, •Checkered Forearm/Grip
•Easy Drop-In Installation, •Matte Black Finish
•DuPont® Extreme Temperature Glass Reinforced Polymer
Fits: Most 91/30 Rifles & M-38, M-44 Carbines and Mosin Nagant
Variants 7.62x54R
Limited Lifetime Warrenty
Item # Nagant-MCS....................$64.99
Note: For the most part these are drop in but some Minor Modification
may be Required.
Installation Instructions: http://www.atigunstocks.com/AssetsClient/MOI0300.pdf
ORDER
ON-LINE NOW!
Mosin Nagant Scope Mount with Bolt Handle
This mounting system allows for the
scope to be mounted where it should be mounted , over the bolt. Requires
some light gunsmithing but the results are worth it. Scope your Nagant
and give it the long range accuracy it deserves.
•Unique scope mount made of Hard
Coat Anodized T6 Aluminum
•Allows scope to be mounted over the receiver
•Bolt handle is polished stainless steel •Assembly hardware
and detailed instructions included
Item # NAGANT-SC.................$39.99
Installation Instructions:
http://www.atigunstocks.com/AssetsClient/MOI0600.pdf
ORDER
ON-LINE NOW!
ATI CUSTOM NYLON SLING W/ SWIVELS
This is a great sling for the Nagant Polymer
stock above because it incorporates dual sling swivels to attach to
the stud post on the stock. However, it will work equally well with
any stock with stud post attachment points.
•Attaches to any Swivel
Stud, •Black Nylon, •Laser Etched Sling Swivel,
•Leather Embossed ATI Logo, •Limited Lifetime Warranty
FITS: Any firearm with sling swivel studs
Item # ATI-Sling..................$14.99
ORDER
ON-LINE NOW!
Allen Endura Sling
Already have sling swivels on your
firearms and just need a really good sling... Well this is it. Nice,
padded fully adjustable to adapt to any rifle or shotgun. Price is
right too...
Item # Allen-ES85.................$9.99
ORDER
ON-LINE NOW!
1" All Purpose Nylon Web Sling
How many times have I heard people
say, " Can't I just find something cheap that works. Well, here
it is . Standard 1" black nylon all purpose web sling with dual
buckles... Fully adjustable. Works great on AR-15 Rifles and just
about anything with sling swivels...
Best of all, the price is right.
Item # ECON-SLING......................$4.99
ORDER
ON-LINE NOW!
INTRODUCING
THE
UTG AMBIDEXTROUS BELT HOLSTER
- 
- 
THESE FIT GREAT, THEY PROTECT GREAT, THEY LOOK
GREAT, THEY WORK GREAT AND THE COST IS GREATLY BELOW ANYTHING ELSE
ON THE MARKET. ALSO FITS MOST OTHER STANDARD SIZE ( THINK BERETTA
92F ) 9MM AND .40 CAL PISTOLS AS WELL AS 1911 GOV'T MODEL .45'S AND
MANY OTHERS.
ASK FOR ITEM # UTG-HOLSTER1.........$9.99
EACH.
ORDER
ON-LINE NOW!
SEE THESE AMMO POUCHES?
WELL, AS MY CAJUN FRIEND SAID, WE HAVE BEAUCOUP OF THEM. IN
N.C. TALK THAT MEANS A BUTTLOAD. THEY ARE NICE WITH BELT LOOPS ON
THE BACK. WE ARE CLEARING THEM OUT AT ONLY .50 CENTS EACH...
MINIMUM ORDER IS 20 PIECES....
ITEM # CO-LAP............20/PK........$10.00
NOTE: CONSIDER THE FACT THAT ACTUAL SHIPPING MAY EXCEED
THE COST OF THE PRODUCT ON THIS ITEM.
AK SINGLE MAG POUCHES? ...WE
THINK.
WE HAVE A COUPLE DOZEN OF THESE GREEN LEATHER POUCHES
BACK IN THE WAREHOUSE. NO ONE IS SURE EXACTLY WHERE THEY CAME FROM
OR WHAT THEY ARE. WE DO KNOW THEY ARE IN NICE SHAPE AND A 30 ROUND
AK MAG FITS THEM GREAT. SO HERE IS THE OFFER. EACH POUCH WE SELL WILL
CONTAIN A NEW AK-30 STEEL MAG FOR THE LOW LOW PRICE OF ONLY..... $12.50.
ASK FOR THE AK SINGLE MAG POUCH DEAL
ITEM # AK-SMPD..........$12.50
SKS
30 ROUND DETACHABLE MAGS
NICE NEW ALL STEEL CONSTUCTION U.S. MADE
30 ROUND DETACHABLE SKS MAGS. ITEM # SK30-MD.........$19.99
CONSULT STATE AND FEDERAL LAWS BEFORE
INSTALLING, SEC 922r MAY APPLY.
ORDER
ON-LINE NOW!
